Summer of Making – Water Balloon launcher


The 1st project of the Summer of Making was a Water balloon launcher.

Pretty simple and the kids loved being able to help out in the building of it.

We followed the instructions verbatim from the Make magazine link. If it’s not clear – it wasn’t to me – you want to purchase 2″ inner diameter PVC pipe.

Total cost was $24, with nearly everything sourced from Lowe’s home improvement store. I had some left over PVC glue from a previous project and the local tire place gave us the valve stem for free.

Here are the parts laid out.

Measuring out the main launch tube for cutting.

  

Measuring out the secondary tube and end handles that make up the air reservoir.

All the cut parts laid out for a sanity check before gluing.

unasembled

We placed the valve stem on the right side tube that makes up the handle.  Drill the hole small and work up to the size you need. Wow, it was a tight fit!

The finished product.

finished

It works very well. Our first test shot went nearly 60 ft.  It takes some playing around with the balloon size, amount of water “batting” used and the air pressure.

So far our best results have been with a water balloon that fits just barely in the barrel, about 2-3 inches of water batting and ~25 lbs. of air pressure.

UPDATE: (4/17/2015) 6 inches of water batting and 40 lbs of air pressure, sent a water balloon over 100 ft away.

The project was a lot of fun and I highly recommend it if you have some younger children looking to build something fun for the summertime .

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s